Husqvarna 535i XP User Manual (English)

Other manuals for Husqvarna 535i XP

Questions and Answers:

J
James MartinSep 4, 2025
What does it mean if a warning sign on the keypad flashes after start on Husqvarna 535i XP Chainsaw?
- N
  Nicole TaylorSep 4, 2025
  If a warning sign on the keypad of your Husqvarna Chainsaw flashes after you start it and then the product stops, it could be due to several reasons: the power trigger might have been pushed during start (avoid pushing the power trigger when starting the product), there might be water in the main switch signal connector (disassemble and dry the stop signal connector, then reassemble it), there could be a short circuit in the keypad (replace the keypad), or there might be a short circuit in the main switch (replace the main switch).
J
John JacobsonAug 23, 2025
What to do if the red error LED flashes on my Husqvarna Chainsaw?
- M
  Michael ClarkAug 23, 2025
  If the red error LED flashes on your Husqvarna Chainsaw, it could indicate a few issues: * The battery might be empty, in which case you should charge the battery. * There could be a temperature deviation. Use the battery in temperatures between -10°C (14°F) and 40°C (104°F). * There might be an overvoltage issue. Remove the battery from the battery charger.
B
brandon43Sep 1, 2025
What does it mean if a warning sign shows a red light on Husqvarna 535i XP keypad?
- K
  Kelly NelsonSep 2, 2025
  If a warning sign shows a red light on the keypad of your Husqvarna Chainsaw, it indicates that permanent error codes are preventing the product from running. Erase the error codes using a diagnostic tool. Alternatively, the control unit might be broken and need replacement.
R
Rose MercadoAug 31, 2025
Why Husqvarna 535i XP product stops when I apply work load?
- W
  William CallahanSep 1, 2025
  If your Husqvarna Chainsaw stops when you apply a workload, it may be due to a defective connection in the keypad connector. Ensure that the power connectors between the battery and the product are clean and not damaged.
E
ebrownAug 30, 2025
What to do if Husqvarna 535i XP Chainsaw motor makes sudden movement, then stops?
- L
  Lisa PerezAug 31, 2025
  If the electrical motor of your Husqvarna Chainsaw makes a sudden movement when you push the power trigger and then stops, it is likely due to a short circuit in the control unit. Replace the control unit.
P
Paul RitterAug 29, 2025
What to do if Husqvarna 535i XP shows red light after installing a new control unit?
- H
  Henry CastroAug 29, 2025
  If your Husqvarna Chainsaw shows a red light after installing a new control unit, it may be because the spare part comes without software. Use a diagnostic tool to install the software.
K
Kimberly LopezAug 28, 2025
What to do if Husqvarna 535i XP Chainsaw charger does not start?
- M
  Madison CervantesAug 28, 2025
  If the Husqvarna Chainsaw charger doesn't start and no LEDs light up when the battery is attached, check the following: ensure the connection between the charger and battery is clean and undamaged. Also, check the battery. If the issue persists, the charger itself may be defective. Disconnect the charger from the mains outlet for at least 1 minute, then reconnect it. Verify that the fan starts and a green LED illuminates for about 3 seconds. If not, replace the charger.
A
Annette MartinezAug 27, 2025
What to do if a warning sign flashes red on the battery of Husqvarna Chainsaw?
- F
  fhurleyAug 27, 2025
  If a warning sign flashes red on the Husqvarna Chainsaw battery when you press the start button, it could be due to several reasons: the battery temperature might be too high (wait until it cools down, or insert it into the charger to cool it faster), the voltage might be too low (charge the battery), the temperature could be too low (ensure the battery temperature is above -10° C), or the battery itself might be defective (replace it).
C
Colleen MooreAug 27, 2025
Why Husqvarna 535i XP won't start and no LEDs are on?
- J
  Johnny WilliamsAug 27, 2025
  If your Husqvarna Chainsaw doesn't start and no LEDs light up when you press the power button, there could be several reasons. First, the battery might be defective; press the on/off button to check the battery – at least one green LED should illuminate. Other potential causes include a defective connection between the battery and the product (ensure the connectors are clean and undamaged), a faulty connection in the keypad connector (make sure it's correctly assembled, dry, undamaged, and free from corrosion), a broken keypad (replace it), damaged cables between the control unit and keypad/main switch (repair or replace them if damaged), or a short circuit in the control unit (replace it).
J
John WilliamsAug 25, 2025
What to do if the red error LED comes on on my Husqvarna 535i XP Chainsaw?
- A
  Alexandria BrooksAug 26, 2025
  The red error LED indicates that the cell difference is too much (1V). Speak to your servicing dealer.

Husqvarna 535i XP Specifications

General

Battery Voltage	36 V
Weight (excluding battery and cutting equipment)	2.6 kg
Chain Speed at Max Power	20 m/s
Sound Pressure Level at Operator's Ear	94 dB(A)
Recommended Bar Length	12-16 inches
Oil Tank Volume	0.2 liters
Chain Pitch	3/8 inch
Chain Gauge	0.043 in

Summary

Product Introduction

Intended Use

Defines the product's purpose in forest service for felling, limbing, and cutting.

Product Overview

Illustrates and labels the components of the chainsaw model.

Product Description

Introduces the 330i and 535i XP chainsaw models with an electrical motor.

Product Symbols and Markings

Symbols on the Product

Explains safety warnings and operational symbols found on the product itself.

Symbols on Battery/Charger

Details symbols related to battery and charger safety and disposal, especially for Europe.

Comprehensive Safety Guidelines

Safety Definitions and Warnings

Provides definitions for warning levels and general safety precautions for power tool operation.

Work Area and Electrical Safety

Covers maintaining a safe work environment and essential electrical safety measures.

Personal Safety and Protective Equipment

Emphasizes personal alertness, protective gear, and proper attire for safe operation.

Chain Saw Specific Safety

Details critical safety warnings and techniques specific to operating a chain saw, including kickback prevention.

Battery and Charger Safety

Outlines crucial safety instructions for handling and using batteries and battery chargers.

Maintenance Safety

Highlights safety precautions and requirements before performing any maintenance on the product.

Product Assembly Procedures

Assemble Guide Bar and Chain (330i)

Step-by-step guide for attaching the guide bar and saw chain to the 330i model.

Assemble Guide Bar and Chain (535i XP)

Step-by-step guide for attaching the guide bar and saw chain to the 535i XP model.

Spiked Bumper Installation

Instructions for installing a spiked bumper, referring to a servicing dealer.

Operating the Chainsaw

Pre-Operation Checks

Essential functional checks to perform before using the chainsaw for safety and proper operation.

Battery and Charger Connection

Procedures for connecting the battery charger and charging the battery.

Starting and Stopping the Product

Step-by-step instructions on how to safely start and stop the chainsaw.

Understanding Kickback

Explains the causes of kickback and how to prevent it through correct working technique.

Cutting Techniques

Details various cutting techniques, including basic cuts, limbing, and felling.

Felling Techniques

Covers safe tree felling, including distance, direction, preparation, and specific cuts.

Handling Tensioned Wood

Guidance on safely cutting trees and branches that are under tension.

Product Maintenance and Care

Safety Device Checks

Procedures for regularly checking the functionality and condition of safety devices.

Component Checks and Cleaning

Instructions for checking key components like the trigger, brake, catcher, keypad, battery, and cooling system.

Saw Chain Sharpening and Adjustment

Detailed steps for sharpening the saw chain and adjusting the depth gauge for optimal performance.

Tensioning and Lubrication Checks

Guidance on proper chain tensioning and checking saw chain lubrication.

Wear Inspection

How to inspect the guide bar, chain, and drive sprocket for wear and perform necessary maintenance.

Troubleshooting and Fault Finding

Keypad Fault Indicators

Explains possible fault codes displayed on the keypad and their corresponding actions.

Battery and Charger Issues

Lists common problems with the battery and charger, along with solutions.

Technical Specifications and Accessories

Technical Data

Provides key technical specifications for the 330i and 535i XP models.

Approved Cutting Attachments

Lists recommended guide bar and saw chain combinations approved for the product.

Approved Batteries and Chargers

Specifies approved battery models and compatible battery chargers.

Regulatory Compliance

EC Declaration of Conformity

Official declaration of the product's conformity with relevant EU directives and standards.

Related product manuals

Husqvarna 576 XP/G AT

58 pages

Husqvarna 550 XP Mark II

40 pages

Husqvarna T540 XP

44 pages

Husqvarna 372 XP W X-TORQ

44 pages

Husqvarna 535i XP User Manual

Table of Contents

Other manuals for Husqvarna 535i XP

Questions and Answers:

Husqvarna 535i XP Specifications

Summary

Product Introduction

Intended Use

Product Overview

Product Description

Product Symbols and Markings

Symbols on the Product

Symbols on Battery/Charger

Comprehensive Safety Guidelines

Safety Definitions and Warnings

Work Area and Electrical Safety

Personal Safety and Protective Equipment

Chain Saw Specific Safety

Battery and Charger Safety

Maintenance Safety

Product Assembly Procedures

Assemble Guide Bar and Chain (330i)

Assemble Guide Bar and Chain (535i XP)

Spiked Bumper Installation

Operating the Chainsaw

Pre-Operation Checks

Battery and Charger Connection

Starting and Stopping the Product

Understanding Kickback

Cutting Techniques

Felling Techniques

Handling Tensioned Wood

Product Maintenance and Care

Safety Device Checks

Component Checks and Cleaning

Saw Chain Sharpening and Adjustment

Tensioning and Lubrication Checks

Wear Inspection

Troubleshooting and Fault Finding

Keypad Fault Indicators

Battery and Charger Issues

Technical Specifications and Accessories

Technical Data

Approved Cutting Attachments

Approved Batteries and Chargers

Regulatory Compliance

EC Declaration of Conformity

Related product manuals