Husqvarna 701 Enduro 2018 User Manual

12 SERVICE WORK ON THE CHASSIS
132
12.25 Adjusting the basic position of the clutch lever
Info
When the adjusting screw is turned clockwise, the clutch lever moves closer to the handlebar.
When the adjusting screw is turned counterclockwise, the clutch lever moves away from the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding.
S01043-10
– Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
1
.
– When adjusting the clutch lever, make sure to leave a mini-
mum clearance to other parts of the vehicle.
Guideline
Minimum clearance 5 mm (0.2 in)

Husqvarna 701 Enduro 2018 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	692.7 cc
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.6:1
Starter	Electric
Transmission	6-speed
Final Drive	Chain
Front Tire	90/90-21
Rear Tire	140/80-18
Power	74 hp (55 kW) @ 7, 500 rpm
Fuel System	Fuel injection
Front Suspension	WP USD, 48 mm
Rear Suspension	WP monoshock
Front Brake	300 mm disc
Rear Brake	Brembo 240 mm disc
ABS	Yes, switchable
Ground Clearance	270 mm
Fuel Capacity	13 liters (approx. 3.4 gallons)
Dry Weight	145 kg