52 - English
3. INSTALLATION
3.6 One Automower™ in several
gardens
Automower can be connected/coded for more than one
installation, which allows a mower to be used in several
gardens.
As usual the mower is coded to the first garden and
then to the next garden via the PIN code function (The
function to change the PIN code). Different PIN-codes
should be used if the installations are positioned closer
than 4 m (13 ft).
3.7 Several Automower™ machines
in one garden
If the lawn in the garden is larger than that
recommended for the chosen Automower, two or more
mowers and charging stations should be installed in
the garden.
Position the installations, with their own working
areas, right next to each other. Place the
demarcated wires between the areas under the
same staple. All the grass in the garden will then
be cut.
The installations will require different PIN codes.
To Next Page
Loading...
