Contents
1 Introduction
1.1 Introduction........................................................... 3
1.2 Product overview ..................................................4
1.3 Symbols on the product........................................ 5
1.4 Symbols on the display......................................... 5
1.5 Symbols on the battery......................................... 6
1.6 General manual instructions................................. 6
1.7 Menu structure overview - 1..................................7
1.8 Menu structure overview - 2..................................8
1.9 Display.................................................................. 9
1.10 Keypad................................................................ 9
2 Safety
2.1 Safety definitions.................................................10
2.2 General safety instructions..................................10
2.3 Safety instructions for installation........................11
2.4 Safety instructions for operation..........................11
2.5 Safety instructions for maintenance.................... 11
2.6 Battery safety...................................................... 11
2.7 How to lift and move the product.........................12
3 Installation
3.1 Introduction - Installation..................................... 13
3.2 Main components for installation.........................13
3.3 General preparations.......................................... 13
3.4 Before the installation of the wires...................... 13
3.5 Installation of the product.................................... 18
3.6 To put the wire into position with stakes............. 19
3.7 To bury the boundary wire or the guide wire.......20
3.8 To extend the boundary wire or the guide wire... 20
3.9 After the installation of the product......................20
3.10 Product settings................................................ 21
3.11 Automower
®
Connect app................................ 21
3.12 Product settings with keypad and display......... 21
4 Operation
4.1 To use the ON/OFF button..................................31
4.2 To start the product............................................. 31
4.3 To park the product............................................. 31
4.4 To stop the product............................................. 32
4.5 To set the product to OFF................................... 32
4.6 To charge the battery.......................................... 32
4.7 Adjust the cutting height......................................32
5 Maintenance
5.1 Introduction - maintenance..................................33
5.2 Clean the product................................................33
5.3 Replacement of the blades................................. 34
5.4 Battery.................................................................35
5.5 Winter service..................................................... 35
6 Troubleshooting
6.1 Introduction - troubleshooting..............................36
6.2 Fault messages...................................................36
6.3 Information messages.........................................40
6.4 Indicator lamp in the charging station................. 41
6.5 Symptoms........................................................... 42
6.6 Find breaks in the loop wire................................ 43
7 Transportation, storage and disposal
7.1 Transportation..................................................... 46
7.2 Storage................................................................46
7.3 Disposal.............................................................. 46
8 Technical data
8.1 Technical data.....................................................47
8.2 Registered trademarks........................................49
9 Warranty
9.1 Warranty terms....................................................50
2 1462 - 007 - 14.03.2022
To Next Page
Loading...
Need help?
General
