1. Product body
2. Top cover
3. Hatch to keypad, display and cutting height
adjustment
4. Stop button
5. Rear wheels
6. Front wheels
7. Blade disc
8. Skid plate
9. Contact plates
10. LED indicator for operation check of the charging
station and boundary wire
11. Charging station
12. Display
13. Keypad
14. ON/OFF button
15. Rating plate with product identification code
16. Cutting height adjustment
17. Maintenance tool
1
18. Cutting system
19. Chassis box with electronics, battery and motors
20. Handle
21. Loop wire for boundary wire and guide wire
2
22. Couplers for the loop wire
3
23. Stakes
4
24. Connectors for the loop wire
5
25. Screws to attach the charging station
26. Power supply
6
27. Measurement gauge for installation of the
boundary wire (remove the measurement gauge
from the carton of the product)
28. Operator's Manual and Quick Guide
29. Blade
30. Low-voltage cable
1
Found below the top cover.
2
Is a part of the installation kit.
3
Is a part of the Installation kit.
4
Is a part of the installation kit.
5
Is a part of the installation kit.
6
The appearance can be different for different markets.
4 - Introduction 1462 - 007 - 14.03.2022