Note: If
Avoid collisions with mower
is selected it
can result in grass that is not cut around the charging
station.
3.12.9.4 Terrain kit
When using the terrain wheels with weights, special
settings are needed to compensate for more weight.
To set the Terrain kit
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Accessories > Terrain
kit > Enable Terrain kit
.
3. Push the OK button to enable or disable the
function.
4. Push the BACK button.
3.12.9.5 FlexiFence
If you install the FlexiFence accessory, you must enable
the Zone generator function of the product.
3.12.9.6 To enable the Zone generator function
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Installation
> Zone generator
.
3. Push the OK button to enable
Zone generator
.
4. Push the BACK button.
30
- Installation 1462 - 007 - 14.03.2022
To Next Page
Loading...
Need help?
General
