What does 'Limited cutting height range' mean on my Husqvarna Lawn Mower?
If your Husqvarna Lawn Mower displays 'Limited cutting height range', it indicates that the maximum and minimum position of the cutting height adjustment is limited. Check that there no grass or other objects are blocking the blade disc from moving up or down.
Why is my Husqvarna Lawn Mower running at the wrong time?
If your Husqvarna Lawn Mower is running at the wrong time, there are two possible reasons: * The robotic lawnmower clock needs to be set. Set the clock. * The start and stop times for mowing are incorrect. Reset the start time and stop time settings for mowing.
What to do if my Husqvarna Automower 320 displays 'Slope too steep'?
If your Husqvarna Lawn Mower displays 'Slope too steep', it means that the robotic lawnmower is in an area that exceeds the maximum permitted slope. Isolate the very steep part of the working area so that no part of the working area exceeds the specifications for the robotic lawnmower.
What to do if my Husqvarna Automower 320 battery is low?
If your Husqvarna Lawn Mower displays a low battery warning, it could be due to several reasons: * The lawnmower may be unable to locate the charging station. Ensure that the charging station and guide wire are installed correctly. * The guide wire might be broken or disconnected. Find and repair any breaks in the guide wire. * The battery may be spent. Contact your dealer to test or replace the battery. * The charging station's antenna could be defective. Check if the indicator lamp in the charging station flashes red.
What to do if my Husqvarna Automower 320 is upside down?
If your Husqvarna Lawn Mower is upside down, it means that it is leaning too much or has turned over. Turn the robotic lawnmower the right way up.
Why is my Husqvarna Automower 320 stuck in the charging station?
If your Husqvarna Lawn Mower is stuck in the charging station, there is likely an object in the way, preventing it from leaving. Remove the object.
Why is the cutting height blocked on my Husqvarna Lawn Mower?
If the cutting height is blocked on your Husqvarna Lawn Mower, it could be due to grass or another object wrapped around the cutting height adjustment or between the blade disc and chassis. Check the blade disc and the bellows around the cutting height adjustment, and remove any stuck debris.
What to do if the right wheel motor is blocked on my Husqvarna Lawn Mower?
If the right wheel motor on your Husqvarna Lawn Mower is blocked, it is likely because grass or another object has wrapped around the drive wheel. Check the drive wheel and remove the grass or other object.
What to do if the left wheel motor is blocked on my Husqvarna Lawn Mower?
If the left wheel motor on your Husqvarna Lawn Mower is blocked, it is likely because grass or another object has wrapped around the drive wheel. Check the drive wheel and remove the grass or other object.
What does it mean when my Husqvarna Automower 320 Lawn Mower says 'Guide 1 not found' or 'Guide 2 not found'?
If your Husqvarna Lawn Mower displays 'Guide 1 not found' or 'Guide 2 not found', the problem may be: * The guide wire is not connected to the charging station. Check that the guide wire’s connector is tightly connected to the charging station. * There is a break in the guide wire. Find out where the break is and replace the damaged section with a new loop wire and splice using an original coupler. * The guide wire is not connected to the boundary loop. Check that the guide wire is connected correctly to the boundary loop. Splice using an original coupler.
General| Cutting Width | 22 cm |
|---|---|
| Battery Type | Li-Ion |
| Sound Level | 58 dB(A) |
| Battery Voltage | 18 V |
| Noise Level | 58 dB(A) |
| Weather Resistance | Yes |
| Boundary Wire Required | Yes |
| Guide Wire Required | Yes |
| Typical Mow Time on One Charge | 60 minutes |
| Blade Type | 3 pivoting blades |
| Operating Time | 60 minutes |
Overview of the robotic lawnmower, its installation, and usage instructions.
Explanation of symbols found on the robotic lawnmower and their meanings.
Explanation of symbols used within the Operator's Manual for clarity.
Essential safety guidelines for operating, maintaining, and repairing the robotic lawnmower.
Instructions for safely moving and transporting the robotic lawnmower.
Steps for weekly inspection of the robotic lawnmower for wear and damage.
Detailed identification and description of all parts of the robotic lawnmower and accessories.
List of items included in the Automower® package for models 320 and 330X.
Explanation of the robotic lawnmower's mowing technique and working method.
Essential preparation steps before starting the installation of the robotic lawnmower.
Steps for installing the charging station and connecting the transformer.
Procedure for charging the robotic lawnmower's battery before or during installation.
Methods for installing the boundary wire, including pegging and burying.
Guidelines for laying the boundary wire around different working area edges and obstacles.
Creating islands and setting up secondary areas using boundary wire.
Recommendations for laying boundary wire in passages, on slopes, and around obstacles.
Techniques for laying, securing, and splicing the boundary wire.
Instructions for laying the boundary wire towards the charging station.
Procedure for connecting the boundary wire ends to the charging station.
Guidance on laying and positioning the guide wire for optimal navigation.
How to interpret the charging station indicator lamp to verify installation.
Initial setup, language, country, date, time, and PIN code configuration.
Testing the robotic lawnmower's ability to dock with the charging station.
Procedure for charging the robotic lawnmower's battery when new or stored.
How to use the timer to schedule mowing times for optimal lawn care.
Step-by-step instructions for starting the robotic lawnmower.
How to stop the lawnmower during operation and switch it off completely.
Guide to adjusting the cutting height for optimal grass cutting.
Options for starting the lawnmower: Main area, Secondary area modes.
Options for parking the lawnmower: Park until further notice, Start again in 3 hours.
How to use the main switch to start and stop the robotic lawnmower.
Function of the PARK button on the charging station and the lawnmower.
Summary of menu selections, their purpose, and setting options.
Detailed explanation of the timer function, including scheduling and overview.
Instructions on how to adjust the cutting height of the robotic lawnmower.
Configuration of security levels, PIN code, alarm functions, and custom settings.
How to view and interpret fault, info, and reset messages.
Automatic adjustment of mowing times based on grass growth and weather conditions.
Settings for finding the charging station: range, overview, tests, and search methods.
Configuring remote areas: direction, distance, and frequency for optimal lawn coverage.
Advanced installation settings: GPS, corridor width, exit angles, reversing distance.
Managing user profiles: saving, naming, activating for multiple gardens.
Enabling ECO mode for reduced signal usage and spiral cutting for dense grass.
Adjusting time, date, language, country, and cutting height calibration.
Calibrating guide wires and resetting all user settings to factory defaults.
Configuring headlight operation, luminosity, and fault flashing.
Settings for the mower house, including collision avoidance.
Examples of garden layouts with recommended installation proposals and settings.
Instructions for cleaning, charging, and storing the lawnmower and charging station for winter.
Recommendations for professional service and checks before winter storage.
Checks to perform after winter storage before resuming operation.
Detailed instructions on cleaning the robotic lawnmower, chassis, blade disc, and wheels.
Guidelines for safely transporting and moving the robotic lawnmower.
Steps to protect the lawnmower from thunderstorm damage by disconnecting connections.
Step-by-step guide for replacing the mower blades and important safety warnings.
Details about the battery's service life and replacement.
List of display messages indicating malfunctions, their causes, and actions.
List of informational messages, their causes, and recommended actions.
Interpreting the indicator lamp's status for troubleshooting.
Common symptoms of unexpected behavior and troubleshooting steps.
Methods for locating breaks in the boundary loop wire and repair instructions.
To Next Page
