Husqvarna AUTOMOWER 435X AWD - To Start the Product for the First Time

3.10.5.1 To start to use Automower
®
Direct
1. Download the Automower
®
Connect app on
your mobile device.
2. Select Automower
®
Direct on the start
screen of the Automower
®
Connect app.
3. Start Bluetooth
®
on your mobile device and
on the product, refer to
To start the product
for the first time on page 30
.
4. Go to the Settings symbol in the display and
activate Bluetooth
®
.
5. Select the product to pair with in the
Automower
®
Connect app.
6. Enter the PIN code for the product.
Note: You have access to the menus and
functions as long as you are in Bluetooth
®
short-
range.
3.10.6 User interface overview
The user interface overview below shows examples of Automower
®
Connect and the corresponding
display in Automower
®
Access.
Automower
®
Connect
ERROR
Charging station Blocked
MORE DETAILS
Schedule Map
My Automower
R
MOWING
Mowing session ends 13:30
PARK PAUSE
Schedule Map
My Automower
6
R
PARKED
Next start tomorrow 16:30
PARK START
Schedule Map
6
My Automower
R
PAUSED
Ends 13:30
PARK START
Schedule Map
My Automower
R
6
6
Automower
®
Access
6 6
P
6
6
3.11 To start the product for the first
time
When the product is switched on for the first time,
there are some basic settings to do before the
product can start to operate.
1. Push the jog wheel for 3 seconds to switch
on the product.
30 - Installation 1404 - 002 -