Message Cause Action
Weak GPS signal
The sky is obstructed in large parts of
the work area.
If possible, remove obstructing objects.
Disable the GPS navigation function
and use the lawn coverage function in-
stead. Refer to
Lawn coverage on page
33
.
Collision sensor
problem, front/rear
A blockage has caused the product to
stop.
Remove the product from the blockage
and examine the cause of the stop.
The body of the product cannot move
freely around the chassis.
Remove dirt and unwanted material be-
tween the chassis and the body to
make sure that the body of the product
can move freely around the chassis.
The body of the product is not installed
correctly in the rubber dampers.
Make sure that the rubber dampers are
attached correctly in the body of the
product and in the chassis.
1404 - 002 -
Troubleshooting - 53
To Next Page
Loading...
