Note: All countries do not support Automower
®
Connect because of regional specified cellular systems.
The included Automower
®
Connect lifetime service only
applies if there is a third part sub-supplier of 2G/3G/4G
available in the operational area.
The Automower
®
Connect app is preferable if you have
one or few products installed. For users with several
products we recommend you to use Husqvarna Fleet
Services
™
. Refer to
Husqvarna Fleet Services
™
on
page 29
.
3.10.1 To install the Automower
®
Connect
app
1. Download the Automower
®
Connect app on your
mobile device.
2. Sign up for a Husqvarna account in the
Automower
®
Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4. Log in to your Husqvarna account in the
Automower
®
Connect app.
3.10.2 To pair Automower
®
Connect and
the product
1. Do step 1-7 in
To do the basic settings on page 22
.
2. Obey the instructions in the Automower
®
Connect
app.
3.10.3 Dashboard
The dashboard shows the current status of the product
both visually and in text. It is very easy to control the
product by selecting the options, for example
Park
.
In the lower part of the dashboard there are shortcuts to
the
Schedule settings
and the
Map
. The dashboard also
shows symbols according to below:
1. The battery status shows the battery state of
charge. A flash is shown over the battery symbol
when the product charges its battery. A plug is
shown over the battery symbol when the product is
in the charging station without charging.
2. Cutting height.
For more information about the operating modes
Start,
Park
and
Pause
, refer to
Operation on page 31
.
3.10.4 Account
In this menu there is an overview of the account settings
and you can log off from the app.
3.10.4.1 To set the unit format
1. Select the unit format
Metric
or
Imperial
.
3.10.5 My mowers
When choosing
My mowers
you can manage all the
products paired to your account, as well as add new
ones. If there are several paired products it is possible to
select one of them as
Current mower
.
To pair a new product to the Automower
®
Connect app:
1. Select the plus sign (+).
2. Select model.
3. Follow the instructions in the Automower
®
Connect
app to finalize the pairing.
3.10.6 Automower
®
Direct
Automower
®
Direct uses short-range Bluetooth
®
communication, and is included in Automower
®
520H/
550H.
Automower
®
Direct is useful if the operator has the
Automower
®
Connect app and the PIN code, but has
not created a Husqvarna account. Automower
®
Direct is
also useful if the connection with the product is only
temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity. There is
therefore a possibility to communicate with the product
through Bluetooth
®
if you are in short-range of the
product. You can use Automower
®
Direct without a
Husqvarna account as long as you have the product PIN
code.
1457 - 005 - 16.10.2020
Installation - 23
To Next Page
Loading...
