Need help?Do you have a question about the Husqvarna AUTOMOWER 520H and is the answer not in the manual?
General| Cutting Width | 22 cm |
|---|---|
| Maximum Area Capacity | 2200 m² |
| Battery Type | Li-Ion |
| Cutting Height | 20-60 mm |
| Maximum Incline | 45% |
| Battery Voltage | 18 V |
| Boundary Wire Needed | Yes |
| Guide Wire Needed | Yes |
| GPS Assisted Navigation | Yes |
| Connectivity | Bluetooth |
| Typical Mowing Time on One Charge | 100 minutes |
| Sound Level Perceived | 58 dB(A) |
| Blade Type | Pivoting blade |
How to get support and details about the robotic lawn mower, its features, and operation.
Illustrated overview of the product's parts and components.
Explains the meaning of symbols found on the product and battery.
General safety guidelines for using the product.
Diagrams showing the structure of settings in the Automower Connect app.
Important safety information and warnings for product use.
Explains manual terms and provides safety instructions for operation.
Safety precautions for battery handling and lifting the product.
Precautions to take during thunderstorms to protect the product.
Overview, components, and general preparations for installation.
Guidance on where to place the charging station, power supply, and boundary wire.
Instructions for installing wires on slopes, passages, and creating islands.
Positioning the guide wire and setting up work area examples.
Steps for installing the main product and charging station.
Step-by-step guide for installing boundary and guide wires.
Methods for positioning wires using stakes or burying them.
Extending wires and performing checks after installation.
Steps to install the app and pair it with the product.
Viewing product status and controls on the app dashboard.
Managing app account, units, and multiple products.
Configuring product schedules and operation modes.
Adjusting installation parameters and work area settings in the app.
Configuring accessories and general product settings like time/date.
Managing PIN, GeoFence, theft protection, and loop signal.
Instructions for using the main switch and starting the product.
Selecting and using modes like Main area, Park, and Pause.
Steps to safely stop and switch off the product.
Adjusting cutting height and charging the battery.
Importance of maintenance and cleaning procedures for the product.
Cleaning and inspecting the chassis and blade disc.
Procedures for replacing blades and caring for the battery.
Guidelines for winter service and product storage.
Lists common fault messages and their causes/actions.
Lists common information messages and their causes/actions.
Explains the meaning of LED indicators on the product and station.
Guide to identify and resolve common product operational symptoms.
Guide to locate and fix breaks in the loop wire.
Instructions for safely transporting and storing the product.
Steps for removing the battery and product disposal.
Detailed technical specifications and dimensions of the product.
List of registered trademarks used in the manual.
Details of the product's warranty coverage and terms.
Regulatory compliance and conformity statements for US/CA markets.
To Next Page