Technical data
Technical data
P 520D P 525D
Dimensions Refer to
Product dimensions on page 47
.
Tire dimensions 18 x 8.5 x 8 20 x 10-10
Tire pressure, rear – front, kPa / bar / PSI 150 / 1.5 / 22 150 / 1.5 / 22
Max. gradient, degrees ° 10 10
Engine
Brand / Model Kubota D902 Kubota D1105
Nominal engine output, kW @ 3000 rpm
3
14.7 17.8
Displacement, cm
3
898 1123
Max. engine speed, rpm 3300 3200
Diesel fuel, min. octane grade
4
45 45
Tank volume, l 25 25
Oil , API class CF-4 or better Class SAE10W-40 Class SAE10W-40
Oil volume incl. filter, l 3.3 3.3
Oil volume excl. filter, l 3 3
Start motor Electric start 12V Electric start 12V
Cooling system
Cooling system capacity, l 3.7 3.7
Antifreeze ≥ 50% propylenglykol
(MPG)
≥ 50% propylenglykol
(MPG)
Hydraulic system
Max. working pressure, bar / psi 120 / 1740 120 / 1740
Max. workflow l / min 12 12
Hydraulic tank capacity, l 8 8
Hydraulic system capacity, l 13 13
Transmission
Brand Kanzaki Kanzaki
Model KTM23 KTM23
Oil, class API SM, ACEA A3/B4 SAE 10W/50 Synthetic SAE 10W/50 Synthetic
3
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
4
To meet the emission regulations, the fuel need to meet the standard EN590 or ASTM D975 and have a Sul-
phur content of less than 500ppm or 0,05% of weight. Please refer to the Kubota Operators Manual for further
information regarding fuel quality
44 740 - 004 -
To Next Page
Loading...
