23
Cutting Height Pedal
The cutting height pedal lifts the deck to allow setting
the desired deck height. For transport, push the lift
pedal fully forward until the deck lift latches in the
transport (highest) position.
8065-087
Cut height lift pedal
8065-085
Choke control
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent.
Fuses
Fuses are located on the right hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are at pin fuses type as used in
automobiles.
There are three fuses with ratings and functions:
20 A, Primary fuse.1.
7.5 A, Mower deck coupling.2.
10 A, Accessories3.
8065-043
Fuses
To Next Page
Loading...
