33
Stopping the Engine
For all models, move the throttle to the minimum
position (tortoise symbol). If the engine has been
worked hard, allow it to idle a minute to attain a
normal operating temperature before stopping. To
prevent fouling the spark plugs, avoid idling the
engine for longer periods.
Disengage the mower deck by depressing the •
blade switch.
8065-085
Disengage the mower deck and move throttle to minimum
Raise the mower deck by pressing the foot pedal •
forward to the transport position.
When the machine is standing still, activate the •
parking brake by pulling the lever upward.
Turn the ignition key to the stop position.•
Move the steering controls outward.•
Remove ignition key. To prevent unauthorized use, •
always remove the key when leaving the mower.
8065-090
Raise deck to transport position
8065-096
Place controls in neutral position to stop
To Next Page
Loading...
