English-105
REPAIR INSTRUCTIONS
7. Fit the anti-scalp rollers in position
8. Fit the front cover.
9. Secure the springs on the adjuster
pulley.
Removing the cutting unit
1. Follow “The cutting unit’s service
position”, points 1–9 to put the cutting
unit in the service position.
2. Remove the bolt (3) and lift off the
cutting unit.
8009-439
Support wheels
8009-598
Adjuster pulley’s spring
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can fly
off and cause personal injury.
!
8009-674
Bolt
To Next Page
Loading...
Need help?
General
