24 – English
Safety equipment
2
Insert the throttle actuator rod into the carburettor.
Fig 33
Fig 34
Fig 35
6.10 Assembling the throttle lockout,
throttle and spring
1
Put the electrical cables J back in the cable slot as
shown in fi gure 32.
Fig 32
3
Fold the throttle actuator rod forwards so that it can
be placed in the handle part.
4
Push the carburettor into place and make sure
the nipple is securely pushed down in the intake
connector. Push the cover for the choke outlet into
place.
To Next Page
Loading...
