38 – English
Repair instructions
Fig 43
5
Dismantle the pump cover Q and carefully remove
the membrane N with gasket P.
6
Dismantle valve housing S and lever arm T with
accompanying details.
7
Unscrew screws A and lift off cover B and carefully
remove gasket D and control diaphragm C.
8
Unscrew screw J and remove needle valve G with
lever arm F, shaft E and spring H.
9
Use a needle or similar and carefully lift up fuel
screen M.
10
Dismantle high-speed screw L and low-speed
screw K, see fi gure 44.
11
If necessary, dismantle throttle valve V and choke
valve U and remove the shafts with lever arms and
springs, see fi gure 44.
To Next Page
Loading...
