42 – English
Assemble on the saw
1
Refi t the cables H into the cable slot as shown in
fi gure 49.
Repair instructions
Fig 49
Fig 52
Fig 51
2
Insert the throttle actuator rod K into the carburet-
tor, and fi t the fuel hose J as shown in fi gure 50.
3
Fold the throttle actuator rod K forwards so that it
can be placed in the handle part.
4
Push the carburettor into place and make sure
the nipple is securely pushed down in the intake
connector. Push the cover for the choke outlet into
place.
Fig 53
Fig 50
5
Fit the remaining details, see chapter ”Assembling
the throttle lockout, throttle and spring”.
To Next Page
Loading...
