Husqvarna TE 250 - 310 2011 I.E. User Manual

1
A
EN
EN - 9
CONTROLS
FUEL COCK (TE-TXCi)
The left-side tap (1) is a screw tap: screw the ring nut (A) to close
the tap, loosen the ring nut to open the tap.
WARNING*: Be careful not to touch the hot
engine while operating the fuel valve.
FUEL INJECTION ENGINE (TE-TXCi)
In fuel-injection vehicles, the fuel pump is built into the tank,
and the fuel-feeding system has no tap ON - OFF - RES.
The quantity of remaining fuel is indicated on the digital dash-
board by the special warning light (TE).
1. Fuel cock
A. Tap ring nut

Husqvarna TE 250 - 310 2011 I.E. Specifications

General

Year	2011
Manufacturer	Husqvarna
Model	TE 250 - 310 I.E.
Category	Motorcycle
Displacement	249.5 cc
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Fuel Tank Capacity	8.5 L
Starter	Electric
Cooling system	Liquid cooling
Rear suspension	Monoshock
Front brake	Disc brake
Rear brake	Disc brake
Front suspension	USD fork, 48 mm