22 - English
3
Loosen the movement limiter E. Loosen the screw
F and remove the cover. See gure 3.
4
Loosen the screws H to release the brake cable.
Pull back the rubber casing and loosen the screw
G. See gure 4
5
Detach the right-hand brake trigger from its mount
on the rear handle. See g. 5.
Cleaning and inspection
Clean and check all parts carefully.
Parts must be replaced if cracked or showing signs
of other defects. Always use original spare parts.
F
E
G
H
Fig 3
Fig 4
Fig 5
Fig 6
Safety equipment
To Next Page
Loading...
