Husqvarna TrioBrake 550XPG - Assembling the Complete Crankshaft

68 - English
7.26 Assembling a complete crankshaft
1
Fit the complete crankshaft in the crankcase.
Fit the following parts:
• The piston and cylinder *
• The fuel unit *
• The handle system *
• The muer *
• The hand guard *
• The bottom of the carburettor *
• The carburettor *
• The ywheel *
• The starter *
• The cylinder cover
• The centrifugal clutch *
• The chain and bar.
• The clutch cover
* See specic instruction.
Repair Instructions