English - 37
Repair Instructions
3
Dismantle the air lter, the lter holder, the cable
from the intake ange holder and the carburettor
and the throttle cable as outlined in “Dismantling
the carburettor”.
4
Hook o the cabling H from the holder on the
intake system. See gure 25a. Knock out the
POP-out window using a screwdriver. See gure
25b. Lower the tank slightly and slide the fuel hose
down into the hole. Loosen the lower screws of the
intake system using the POP-out hole and the fuel
hose hole. Loosen the other screws.
G
F
H
Fig 25a
Fig 24
To Next Page
Loading...
