Husqvarna TrioBrake 550XPG - Page 49

English - 49
Repair Instructions
4
Hook on the throttle cable E. See gure 48.
Fasten the return hose B and secure it in its mount-
ings on the air lter holder.
Attach the pressure hose A, with the short hose on
the short plastic plug on the fuel pump. See gure
51.
5
Hook it on the left side and then the right side of
the carburettor in the rubber mounting. Then screw
the carburettor in place. See gure 50.
6
Fit the air lter.
B
A
3
Position the guide taps on the air lter holder in the
rubber grommets, F. See gure 50.
G
F
F
F
G
Fig 50
Fig 51
Fig 49