Husqvarna VIKING Designer Jade 20 User Manual

23
1047356-26
14.Lower thread tension (thread tension of the bobbin
case)
Check
1. Insert a full bobbin into the bobbin case.
2. The thread tension spring of the bobbin case shall give a resistance of 17 g when pulling the thread
slowly, using normal #50 polyester thread.
Adjustment
1.Turn screw (A) until the correct thread tension is obtained.
2. Please use a 15 g lead weight or a tension gauge as a setting gauge.
NOTE! Before any adjustment is made remove any loose pieces of thread or fl uff from the thread tension
discs.
Settings

Husqvarna VIKING Designer Jade 20 Specifications

General

Brand	Husqvarna
Model	VIKING Designer Jade 20
Category	Sewing Machine
Language	English