28 104 72 72-26
Buttonhole - bar tack, zero feeding
Check
When a button hole’s bar tack is selected there should not be any feeding.
Adjustment
1. Set pattern selector dial to “
“.
2. Set stitch length dial to “0.5” to “1.
3. Sew a buttonhole to check if the fabric is feeding while sewing the bar tacks.
4. Remove the back cover and the front cover.
5. Adjust the screw (a):
If the fabric is fed forward, turn the screw (a) counter clockwise .
If the fabric is fed backward, turn the screw (a) clockwise.
6. Attach the covers.
To Next Page
Loading...
