Huvitz HBM-1 - Data Edit for IOL Calculation

32
10
Lens index
It is an intrinsic constant of IOL lens model. It is necessary when calculating IOL
formula.
11
Ideal IOL Power
It is an ideal IOL power that expects the target refractive value.
12
IOL calculation
result
It informs 5 IOL power lists that are close to the target refractive value.
13
Reset
Reset the calculation result.
14
LT
LT value is important to Post-Operation IOL calculation. So, it is input to check
the LT value once more.
15
Correction Type
Select the correction type.
16
Type
Select the prior refractive surgery type.
17
Formulas
Select the formulas, and check the input data.
18
Next
Go to next calculation page.
2. Data Edit
No
Name
Function
1
Reset
Reset values to measured data, return to the status:Measured.
2
Cancel
Cancel the window.
3
OK
Save the data with modifications.
If there is not enough data to calculate IOL, directly show the ‘Measurement Data Edit pop-up’ with the following message.
❷
❶
❸