Huvitz HLM-7000P - How to Upgrade the Firmware Software; Introduction

52
AUTO
-LENSMETER
4.7. THERMAL PRINTER TEST
 “PRT: HEAD UP” message is displayed on LCD…
 “PRT: PP EMPTY” message is displayed on LCD when pressing PRINTER BUTTON…
 PRINTER PAPER doesn’t feed properly…
Check1. Open PRINTER COVER and check if HEADER
LEVER towards upside.
Check1. Open PRINTER COVER.
Check2. Check PRINTER PAPER tray.
Check3. Fill up PRINTER PAPER if PRINTER PAPER is empty or near empty.
Check1. Check PRINTER PAPER tray.
Check1. Check if LEVER of PRINTER
HEADER is lifted upward.
YES
N
O
Insert paper if there is no paper
Lower HEADER LEVER.
NO
Change PRINTER MODULE
YES