FAM 15/30/50/70 Unpacking the FAM
HYDAC Filter Systems GmbH
en
Page 15 / 68
BEWA FAM15-70Siem 3099574e en 2009-10-08.doc 2008-10-06
What to Do in Case of Emergency
In the event of an emergency, turn the main switch by 90° to the "OFF" position. The
entire system is then voltage-free downstream from this switch.
Normal pressure is restored to the vacuum column after ≈ 1 minute.
Unpacking the FAM
The FAM is inspected for leaks and proper functioning at the factory, then carefully
packed for shipment. The connectors/ports are closed off so that no contamination
can enter the unit while it is in transit.
When receiving and unpacking the unit check it for damage in transit.
Dispose of the packaging material as appropriate for your area.
To Next Page
Loading...
Need help?
General
