What to do if hydrafacial Cosnetic Equipment touchscreen is blank?
If your hydrafacial Cosnetic Equipment's touchscreen is blank despite the main power being on, try pressing the power button located on the right side of the touchscreen. Also, verify the video cable connection in the rear of the unit.
Why hydrafacial Cosnetic Equipment has no power?
First, ensure the power cord is securely connected to the back of your hydrafacial Cosnetic Equipment unit and plugged into a working wall outlet. If the device still has no power, unplug it and use a small flat head screwdriver to remove the fuse holder box, located between the ON/OFF switch and power cord, and then check the fuses to see if they are in good working condition (not blown).
Lists situations where the system should not be used.
Provides critical safety precautions and limitations for use.
Details physical and electrical specifications of the unit.
Provides crucial operational safety rules and recommendations for users.
Details on connecting the handpiece tubing and cartridge.
Step-by-step guide to powering on the HydraFacial system.
Instructions for placing the system into standby mode.
Steps to completely shut down the HydraFacial system.
Explains how to access different menus and functions via the touchscreen.
Describes how to select treatment protocols from the menu.
General| Category | Professional Skincare Equipment |
|---|---|
| Treatment Types | Hydration |
| Treatment Steps | Extract |
| Handpieces | Multiple |
| Power Supply | 110-240V, 50/60Hz |
| Warranty | 1-year limited warranty |
To Next Page