7/30/01
Page 14-1: Warranty Information
Boxxer 421
Warranty Information
T
o avoid misunderstandings which might occur between machine owners and
manufacturer, we are listing causes of component failure that specifically voids
warranty coverage. Such causes as listed below shall constitute abuse or neglect.
BLOWER:
• Failure to lubricate impellers daily with an oil based lubricant.
• Failure to lubricate bearings as recommended in blower manual.
• Failure to maintain proper oil levels in the blower.
• Failure to use the correct oil grade and viscosity as recommended in
blower manual.
• Failure to properly maintain blower safeguard systems such as waste tank
filter screen, vacuum safety relief valve and waste tank automatic shut-off
system.
• Allowing foam to pass through blower.
HIGH PRESSURE WATER PUMP:
• Failure to maintain proper oil level as recommended in pump manual.
• Failure to change oil in pump at recommended intervals.
• Failure to protect pump against freezing.
• Failure to maintain pump protection shut-off system.
• Failure to use water softener in hard water areas.
• Use of improper chemicals.
VACUUM TANK:
• Failure to properly maintain filtering devices in tank.
• Failure to clean tank as recommended by manufacturer.
• Failure to maintain vacuum safety release in tank.
• Use of improper chemicals.
To Next Page
Loading...
