Page 4-1: Machine Maintenance
Boxxer 421
Machine Maintenance
T
o avoid costly repairs and down-time, it is imperative to develop and practice
good maintenance procedures from the beginning. These procedures fall into
daily, weekly, monthly and quarterly increments, and are outlined below. All recom-
mended maintenance must be performed by competent service personnel.
Important: Record the date and machine hours on the maintenance log.
We have provided a maintenance log for your convenience at the end of this section.
Records of maintenance must be kept and copies may be required to be furnished to
HydraMaster before the warranty is honored. It is recommended that you affix a
copy of the log on the vehicle door near your unit for convenience and to serve as a
maintenance reminder.
OPERATIONAL MAINTENANCE
DAILY:
• Check engine oil level.
• Check high pressure pump oil. Add as necessary.
• Inspect garden hose screen. Clean as needed.
• Visually inspect machine for loose wires, oil leaks, water leaks, etc.
• Lubricate blower with an oil based lubricant through blower inlet.
WEEKLY:
• Inspect vacuum tank s/s filter and filter bag for tears, holes, etc.
Clean, repair or replace as needed.
• One time change of oil and oil filter after first 20 hours of use.
• Check oil level in blower.
• Check drive system screws. Tighten as needed.
• Check pump drive belt for wear.
To Next Page
Loading...
