Page 1-13: General Infromation
Boxxer 421
CORRECT INSTALLATION INCLUDES:
• Vehicle of proper load carrying capacity (recommendation: ½ ton).
• Installation of through-floor fittings for gasoline fuel lines.
• Placing the unit and recovery tank in your vehicle and securing them
with bolts or tie down cleats.
• Connecting gasoline lines.
• Connecting the battery.
• Checking the pump, vacuum blower and engine oil levels prior to
staring the unit.
• Starting the unit to check the engine and see that all systems
function normally.
• Checking all hoses, wands, etc. for correct operation.
TRAINING:
• A thorough review of the operation manual with purchaser.
Instruction and familiarization in:
• How to correctly start up and shut down the unit.
• How to correctly clean with the unit.
• Where and how often to check and change component oil levels.
• How the unit’s systems work.
• How to troubleshoot the unit.
• How to do basic repairs.
• Safety precautions and their importance.
• Freezing damage and how to avoid it.
• Hard water damage and how to avoid it.
• A thorough review of the unit warranty and warranty procedures.
• A thorough review of hard water precautions and warnings.
• How to determine hard water areas.
• Use of water softening systems.
To Next Page
Loading...
