12 Smartec HSA
BLUETOOTH APPLICATIONS
MyMow
®
MyMow
®
is the end-user application for the SMARTEC
®
System.
This application allows the end-user to communicate via Hydro-Gear Bluetooth with the
system to perform simplifi ed troubleshooting and customize pre-set performance parameters.
MyMow
®
is a key component for the end-user to interface with the SMARTEC
®
system and
perform the following features:
1. Simplifi ed troubleshooting
2. Customizing performance
3. Receiving and installing live updates
Customizing
Customize the top end performance of the mower which is determined by factory pre-set
parameters as well as restore defaults to factory settings when necessary.
Troubleshooting
The end-user will be able to see the status of Seat Switch, Neutral, PTO, and Battery. The
inputs will either show up as green or red on the screen. If one of the inputs is shown red,
then the end-user is made aware of the reason the mower won’t run.
Clicking on one of the diagnostic inputs will provide additional information.
MyMow
®
Access
End-user should follow the following steps to access and utilize MyMow
®
.
1. Download MyMow
®
application from Apple Store or Google Play Store.
2. Open up MyMow
®
application on device.
3. Establish bluetooth connection via the MyMow
®
bluetooth connection.
To Next Page
Loading...