Smartec HSA 23
GLOSSARY OF TERMS (cont.)
LBSM: Lap Bar Sensor Module. The Lap Bar Sensor Modules translate rotational input from
the position of the lap bars.
NC: Normally closed switch.
NO: Normally open switch.
Ohm Meter: A meter that only measures resistance, measured in ohms.
Resistance: Is the level of opposition to current fl ow in an electrical system, measured in
ohms (Ω).
Traction Controller: Controller for the drive motors.
VIM: Vehicle Integration Module. It interfaces with all of the modules within the Smartec
drive system by performing machine state checks and ensuring feedback data from the
modules are within cinfi gured parameters.
Voltage: Pressure from an electrical circuit’s power source that pushes charged electrons
(current) through a conducting loop.
To Next Page
Loading...