Hypertherm HyPrecision Predictive P-15 - Page 74

74 HyPrecision Predictive waterjet pump Operator Manual 810120
5 – Preventive maintenance
Preventive maintenance
Low-pressure water system (refer to page 89)
Check the low-pressure water pressure gauges.

Clean the Seal Maintenance Indicator tubes.

Measure the air pressure in the water accumulator tank.
Replace the water filters.

Test the low-pressure water TDS level.
Replace the Seal Maintenance Indicator tubes.

Every
work
shift
Every
500
hours
Every
1,000
hours
Every
1,500
hours
Every
3,000
hours
Every
6,000
hours