DO:
Read/review the Operators manual for the Hypertherm 1000 and
the new torch (Duramax retrofit)
(https://dallasmakerspace.org/wiki/CNC_Plasma_Cutter_Training#
Equipment)
Proper attire
Closed toe shoes
Natural fiber garments instead of synthetics
Wear proper PPE
AWS recommends shade 8 or greater eyewear
Cover exposed skin to protect from IR burn
Use gloves and/or tools to manipulate the material, especially
after cutting when it will be HOT
Report any damages or issues immediately by creating an “Issue or
Request” thread on Talk (https://talk.dallasmakerspace.org)
Safety First!!!
Next: The Equipment – The PlasmaCAM Table
To Next Page
Loading...
