Other Information – Configurations
This is the library of materials settings.
These settings may change as other
configurations are made in machine
setup, so look closely before selecting
anything. Make sure that it is a good
speed and realize other items that may
need to be set up when these are
adjusted.
The black book kept with the
Hypertherm power supply will be
an appropriate starting point.
However, you should consult the
wiki
(https://dallasmakerspace.org/wiki/
CNC_Plasma_Cutter_Training#Eq
uipment) for more up-to-date
information about the DuraMAX
torch.
To Next Page
Loading...
