HYPERVSN MS - 3. PACKAGE CONTENTS

© Copyright 2019 HYPERVSN. All rights reserved 9
3. PACKAGE CONTENTS
Table 4. Package contents
COMPONENT NAME
QUANTITY (# OF PIECES)
Stator
1
Rotor
1
Wall bracket
1
Cable with connectors 6P4C
1
Operating manual
1
Remote control (optional)
1
Safety bolt
1
Tools and fittings required (not supplied)
To assemble and install the Device, you will need the following tools and fittings that are not supplied with
the Device:
 Philips (PH2) screwdriver – to assemble the Device.
Picture 6. PH2 bit
 Drill – to make holes in a wall, where the Device will be mounted.
Holes diameter:
a) for a partitioned wall – 5.3mm,
b) for a concrete wall – 5.0mm.
 Fasteners – 3 pieces to attach the wall bracket (M5 mounting hardware, appropriate for the
mounting surface – a partitioned or a concrete wall).