HMS-600W / 800W USER MANUAL 12
5.2.3 Installation Map
1. Peel the removable serial number label from each Micro Inverter.
2. Affix one serial number label to the respective location on the installation map
and affix another to the PV module frame which is easy to see. The warranty
cards can be obtained from the appendix of this manual or Hypontech website:
https://www.hypon.com/.
5.2.4 PV Connection
1. Mount the Micro Inverter under the PV modules.
2. Connect the PV modules’ DC cables to the DC input side of the Micro Inverter.
5.2.5 Place a Warning Notice
A warning notice shall be placed in such a position that any person gaining access to live
parts will be warned in advance of the need to isolate those live parts from all points of
supply.
Special attention should be paid that the power supply, measuring circuits (sense lines)
and other parts may not be isolated from the network when the switch of the interface
protection is open.