HMS-600W / 800W USER MANUAL 8
3. Working Mode
3.1 Work Mode
1. Normal: Under this mode, Micro Inverter is operating normally and convert DC
power into AC power to support the house loads and feed in to Public Grid.
2. Zero Export Control（optional,HM-2000D）: Under this mode Micro Inverter’s
generation is limit base on the current house loads, there will be no extra power
feed in to the Public Grid.
3. Stand by: There are several circumstance that Micro Inverter will stay in Standby
mode:
- The current condition is contradicted with Micro Inverter operating requirement.
- No house loads or the Export control value has been set as “0” on the HM-2000D
under the Zero Export Control mode.
To Next Page
Loading...
Need help?
General