HySecurity SlideSmart DCS 15 - Page 4

Mount HyNet to SwingSmart DC and
SwingSmart DCS
Remove covers
1
2
Thread bracket
screw into chassis.
3
Place screw into
slotted mounting
hole on bracket.
4
Secure HyNet assembly to chassis.
Insert second screw through bracket
and tighten.
5
Connect wiring.
See page 6.
Tools Required
• Phillips head screwdriver
6
Replace and secure
covers.
www.SecureOpeners.com | (800) 878-7829 | Sales@SecureOpeners.com