HySecurity SlideSmart DCS 15 - Page 5

Mount HyNet to SlideSmart DC and
SlideSmart DCS
Service Outlet
115VAC, 15A
2
Thread bracket
screw into chassis.
3
Place screw into
slotted mounting
hole on bracket.
4
Secure HyNet assembly to
chassis. Insert second screw
through bracket and tighten.
5
Connect wiring.
See page 6.
Remove cover
1
Tools Required
• Phillips head screwdriver
6
Replace cover and
secure gate operator.
www.SecureOpeners.com | (800) 878-7829 | Sales@SecureOpeners.com