What to do if my HySecurity SlideDriver 30F is in Entrapment Mode?
If your HySecurity Gate Opener is in Entrapment Mode (ENTR), it means an IES has been tripped twice within a short time. Inspect the gate area for any obstructions and remove them. To resume normal operation, press the Reset button.
General| Type | Slide Gate Operator |
|---|---|
| Motor | 1/2 HP |
| Drive Method | Chain Drive |
| UL Rating | UL 325 |
| Weather Resistance | NEMA 3R |
| Gate Weight Capacity | 3000 lbs |
| Gate Length Capacity | 30 feet |
| Speed | 1 ft/sec |
| Control Options | Keypad |
Overview of site installation for various SlideDriver models, detailing dimensions and placement.
Detailed breakdown and labeling of all components for the 50VF series.
Outlines the manufacturer's role in ensuring gate operator safety and compliance.
Explains the function and operation of the built-in IES sensor in hydraulic operators.
Details how the gate operator software monitors external safety sensors for compliance.
Illustrates the internal wiring connections for the SlideDriver control panel.
Overview of the VFD control box, its components, and functions.
Overview of the Smart Touch Controller board, power supply, and display interface.
Explains how to interpret the display messages and use the keypad for operator control.
Steps to program the gate operator after installation, including usage class and sensor inputs.
Explains the keypad functions and navigation procedures within the operator's menu modes.
Overview of the User Menu, its items, and how to access and modify settings.
Provides access to advanced gate operator configurations and settings.
Guides on connecting gate operators to security systems and the HyNet Gateway.
Details how to connect various external sensors and accessories to the STC.
Instructions for connecting two gate operators to function as an interlocked pair.
Explains how to connect two gate operators for sequenced operation.
Step-by-step guide for installing HySecurity Hy5B vehicle detectors.
Procedures for testing vehicle loops to ensure they are in good working condition.
Details on planning and installing photo eyes, including types and recommended configurations.
Guides on using the alignment feature to ensure proper photo eye functionality.
Practical tips for installing edge sensors, including placement and wiring.
Lists and explains system diagnostic codes (Alerts, Faults, Errors) and their priority.
Offers step-by-step guidance for resolving common operational issues and malfunctions.
Overview of the S.T.A.R.T. software for configuration, diagnostics, and software updates.
Routine maintenance tasks to ensure the longevity and performance of the gate operator.
Explains common safety symbols used to alert users to potential hazards.
Essential safety guidelines for installing, operating, and maintaining gate operators.
Specific safety directives and precautions for installers of HySecurity gate operators.
Safety guidelines for end-users to ensure safe operation and prevent accidents.
Broad safety principles and practices to follow when operating the equipment.
Critical safety precautions related to electrical connections, wiring, and maintenance.
Emphasizes the importance of proper grounding for electrical safety and equipment protection.
Essential safety information regarding the handling, installation, and disposal of batteries.
Guidelines for the safe handling and disposal of hazardous materials and equipment.
Details requirements and types of secondary sensors for entrapment protection.
Defines UL 325 usage classes to determine appropriate gate operator installation and safety.
Guidance on selecting and installing external sensors to meet UL 325 requirements.
Information on the location and function of the emergency stop button for immediate gate control.
Instructions on how to manually release the gate operator in emergency situations.
Step-by-step procedure for installing the earth ground connection for electrical safety.
Factors to consider when preparing the installation site for the gate operator.
Guidelines and procedures for connecting the gate operator to AC power sources.
Guidance on selecting appropriate wire sizes and calculating maximum wire run distances.
Information on maximum distances for low voltage control wiring based on wire size.
Tables detailing recommended wire sizes and maximum distances for various power configurations.
Wire size charts for 50VF-series operators across different phases and voltages.
Procedure for connecting AC input power to the control transformer without a UPS.
Explains how to connect the modular gate operator unit, including conduit requirements.
Steps for connecting the primary AC input power to a DC Power Supply unit for UPS backup.
Information on the HyInverter AC option for maintaining gate operation during AC power loss.
Instructions for determining and setting the correct gate handing configuration for the operator.
Procedures for swapping hydraulic hoses if the gate has left-handing.
Guidance on adjusting brake valves for smooth gate operation and proper stopping.
Steps for installing the breather cap and ensuring proper grounding of the gate operator.
Instructions for installing and adjusting limit ramps for proper gate travel and slowdown.
Procedure for adjusting the pressure relief valve to set entrapment sensor thresholds.
Details the ModBus RTU communication protocol for monitoring VFD and logging events.
Steps to enable and configure the Emergency Fast Operate (EFO) feature on the Smart Touch Controller.
Instructions for connecting a push-button device for the Emergency Fast Operate function.
Specifies the close speeds for SlideDriver 50VF2 and 50VF3 models during EFO.
Explains UL 325 requirements for external entrapment sensors and monitoring.
Explains the IES as a UL 325 Type "A" sensor and its adjustable sensitivity.
Explains how the software monitors external sensors and changes to sensor inputs.
Details installer responsibilities for sensor configuration and UL 325 compliance.
Instructions on how to temporarily supply power to sensors for alignment and testing.
Overview of the control panel components for SlideDriver models, excluding 50VF series.
A detailed wiring diagram illustrating control panel connections.
Specific information for VFD control boxes used in SlideDriver 50VF models.
Wiring diagram for VFD control boxes manufactured before May 2017.
Wiring diagram for VFD control boxes released in May 2017.
Overview of the Smart Touch Controller board, power supply, and display interface.
Explains how to interpret the display messages and use the keypad for operator control.
Steps to program the gate operator after installation, including usage class and sensor inputs.
Instructions for configuring operator settings remotely using the S.T.A.R.T. software.
Describes how to navigate the operator's menus using the Smart Touch Controller keypad.
Explains the keypad functions and navigation procedures within the operator's menu modes.
Details the display and keypad operations when the gate operator is in Run Mode.
How to view scrolling status displays that provide operator information.
Explains various status displays like Build Year, Operator Type, and Usage Class.
Instructions on how to pause and resume the scrolling status display for focused viewing.
Information on how the display dims to conserve energy and returns to full brightness.
How to view the current software version and the process for updating it.
Steps to verify and adjust the gate operator's date and time settings.
Overview of the User Menu, its items, and how to access and modify settings.
Lists User Menu items, settings, tasks, and STC wire connections.
Details advanced configuration options available in the Installer Menu.
Explains how to connect external entrapment protection sensors and accessories.
Guides on programming the three user-programmable output relays for various functions.
Details programmable functions, performance, and wire connections for user relays.
Information on the Hy8Relay module for adding extra relay terminals to the system.
Instructions for connecting two gate operators to function as an interlocked pair.
Illustrates the wiring diagram for connecting two gate operators in a dual gate configuration.
Outlines requirements for power, software versions, and accessories for dual/sequenced gates.
Step-by-step guide to program gate operators for interlocked (Primary/Secondary or Sally Port) functionality.
Explains how to connect two gate operators for sequenced operation, detailing protocols and wiring.
Details the vehicle loop layout for sequenced gate configuration #1.
Details the vehicle loop layout for sequenced gate configuration #2.
Configures anti-tailgate modes, affecting gate closing logic based on vehicle detector triggers.
Sets up user relay notification for vehicles detected as tailgating.
Step-by-step guide for installing HySecurity Hy5B vehicle detectors.
Procedures for testing vehicle loops to ensure they are in good working condition.
How to check the gate operator's software version for compatibility with Hy5B features.
Instructions for installing Hy5B vehicle detectors into the control box sockets.
Defines loop types and their corresponding installer menu and STC settings.
Identifies and resolves common faults and errors related to vehicle detectors and loops.
Procedure for manually changing loop frequency to improve detection or resolve crosstalk.
How to check and interpret the call strength of a vehicle detector to assess loop performance.
Instructions for installing standard 11-pin box type vehicle detectors.
Illustrates recommended loop layout dimensions for traffic systems.
General instructions for installing photo eyes for entrapment protection and gate activation.
Details on planning and installing photo eyes, including types and configurations.
Compatibility requirements for photoelectric sensors with UL 325 standards.
Steps for physically installing photo eyes, considering location for detection.
How to configure photo eyes, especially for newer models.
Step-by-step instructions for aligning photo eyes using the controller's feature.
Guidelines for installing gate edge sensors to protect entrapment zones.
Compatibility requirements for edge sensors, emphasizing UL 325 recognition.
Practical tips for installing edge sensors, including placement.
Explains system diagnostic codes (Alerts, Faults, Errors) and their priority.
Offers step-by-step guidance for resolving common operational issues.
Describes the process to override tripped sensors or fault conditions for gate operation.
Lists alerts, faults, and errors, their causes, and suggested solutions.
Troubleshooting steps for critical low power alerts related to 24V control voltage.
Steps to resolve alerts indicating low battery voltage or charging issues.
Troubleshooting for alerts indicating a lack of AC power to the operator.
Troubleshooting photo eye errors preventing gate operation, related to closing.
Troubleshooting photo eye errors preventing gate operation, related to opening.
Troubleshooting gate edge sensor errors that block gate movement or cause SAFE mode.
Resolving alerts for gates that have been forced open and cannot re-close.
Troubleshooting alerts indicating a gate has drifted from its closed position.
Diagnosing and resolving alerts when gate limits are not reached properly.
Troubleshooting frequency shift faults in Hy5x detectors, often related to loop integrity.
Steps to identify and fix issues with shorted vehicle detector loops.
Troubleshooting alerts for active loops triggered longer than the set limit.
Addressing alerts indicating the gate requires more power to move.
Resolving alerts for stuck gates caused by hardware issues or environmental factors.
Troubleshooting missing or damaged target magnets or sensors for gate position.
Diagnosing and fixing internal communication errors between STC and VFD.
Resolving alerts related to a loose or depleted coin battery in the Smart Touch Controller.
Troubleshooting false slowdown alerts on VFD operators, related to limits or ramps.
Resolving alerts indicating a failure in the external gate latch or lock mechanism.
Diagnosing and resolving errors related to incorrect gate travel direction or limit switch issues.
Troubleshooting IES disconnect errors, checking sensor connections, software, and wiring.
Resolving communication errors between the Hy5B detector and the Smart Touch Controller.
Troubleshooting communication issues between primary/secondary gate operators.
Addressing errors where the display shows no indication, suggesting internal issues.
Diagnosing communication errors between the STC board and the VFD.
Resolving checksum errors indicating corrupt software or data.
Troubleshooting RPM sensor disconnection or wiring issues.
Diagnosing battery disconnect errors for DC power supply connections.
Troubleshooting VFD slowdown switch errors, checking limits and ramp adjustments.
Guides on how to access and view the operator's event log using the User Menu.
Troubleshooting steps for AC-powered gate operators where the motor is not running.
General notes on electrical system maintenance and troubleshooting using diagnostic codes.
Information on ensuring smooth gate operation to improve motor and component life.
Discusses factors affecting gate speed and potential issues with the hydraulic system.
Overview of the S.T.A.R.T. software for field service activities like configuration and diagnostics.
Step-by-step instructions for downloading and installing the S.T.A.R.T. software.
Explains the time delay Soft Stop system and brake valves for controlled gate stopping.
Describes the Soft Start feature using the Accumulator With Out Gas (AWOG).
Routine maintenance tasks to ensure the longevity and performance of the gate operator.
Information on verifying and adjusting the drive rail alignment for proper gate movement.
Details on drive wheel assemblies, including AdvanceDrive™ and XtremeDrive™.
Procedures for checking fluid levels, looking for leaks, and changing hydraulic fluid.
Advice on addressing potential issues caused by cold weather, such as ice buildup.
Guidance on adjusting brake valves for precise gate stopping and smooth operation.
Instructions for adjusting the pressure relief valve to control maximum hydraulic pressure.
Information on the solenoid-operated open valve and its function.
Recommended maintenance intervals for various operator parts and components.
Technical specifications for various SlideDriver models, including duty cycle, horsepower, and drive type.
Legal notice regarding copyright and reproduction restrictions for the manual.
Lists HySecurity's registered trademarks and associated product names.
Specific tips for wiring the SENSOR COM terminal for proper sensor connectivity.
Guidance on navigating the controller's menus using the keypad buttons.
Wiring diagram and configuration for a 2-channel wired edge sensor system with Hy2NC.
Wiring and configuration instructions for a thru-beam photo eye sensor.
Wiring and configuration guide for a reflective photo eye sensor.
Wiring and configuration for the MIM-62 multi-input module to connect various sensors.
Wiring diagram for the iGAZE kit, typically used with wireless gate edges.
A comprehensive checklist to ensure all installation steps and safety checks are completed.
Provides French translations for key safety instructions found in the manual.
General warranty terms for HySecurity products regarding material and manufacturing defects.
Details warranty periods for products purchased through authorized distributors and registered.
Outlines warranty terms for products not meeting registration or authorized distributor purchase criteria.
Lists limitations and exclusions applicable to the HySecurity warranties.
States the exclusion of all other warranties, express or implied, by HySecurity.
Defines the buyer's exclusive remedies in case of product nonconformity.
Conditions and requirements that must be met before installing the gate operator.
Specifies operator is for vehicle use only and requires separate pedestrian access.
Emphasizes correct gate installation and avoiding over-tightening components.
Guidelines for locating user controls at a safe distance from moving gate parts.
Instructions for placing and using non-contact sensors for entrapment protection.
Placement guidelines for contact sensors on slide gates to prevent entrapment.
Requirements for hardwired contact sensors to ensure wiring is protected.
Guidelines for locating wireless devices where signal transmission is not obstructed.
To Next Page
