What to do if my HySecurity Gate Opener is in Entrapment Mode?
If your HySecurity Gate Opener is in Entrapment Mode (ENTR), it means an IES has been tripped twice within a short time. Inspect the gate area for any obstructions and remove them. To resume normal operation, press the Reset button.
General| Gate Speed | 12 inches per second |
|---|---|
| Gate Weight Capacity | 2000 lbs |
| Max Gate Length | 40 ft |
| Drive System | Chain |
| UL Rating | UL 325 |
| Mounting Type | Pad Mount |
| Warranty | 2 years |
Provides essential contact details, bulletins, and links to support documents.
Covers essential safety practices, warning symbols, and installer requirements.
Details safe handling of electrical components, environmental concerns, and battery precautions.
Explains sensor types, installation, compatibility, and UL 325 requirements.
Defines UL 325 usage classes for gate installations.
Provides a visual guide to gate operator site installation.
Identifies key components of the SlideDriver 50VF models.
Covers electrical service, grounding, wire sizing, charts, and UPS options.
Guides through essential setup steps like gate handing, limit adjustments, and software configuration.
Covers Smart Touch Controller board, power supply, wiring tips, and accessory connections.
Explains how to configure and connect multiple gate operators.
Details installation and setup for vehicle detectors, Hy5B, loops, and layout considerations.
Covers photo eye mounting, configuration, connections, function, and alignment.
Details edge sensor compatibility, installation, and tips.
Explains how to use the STC keypad, navigate menus, and interpret displays.
Provides guidance for diagnosing and resolving system alerts, faults, and errors.
Covers software updates, electrical checks, clock battery, and mechanical/hydraulic system care.
Outlines recommended maintenance intervals for various operator parts.
Provides safety section translations into French.
Lists technical specifications for different SlideDriver models.
To Next Page
