122 MX3630-01 Rev. J SlideDriver/SlideDriver 50VF Series © 2019 www.hysecurity.com
7. Save the START< >_setup.exe le to your desktop.
8. Double-click the le to begin the installation.
9. Click RUN. A setup window appears.
10. Follow the step-by-step instructions to complete the installation.*
11. When the download is complete, log off the HySecurity website. Shortcuts for the S.T.A.R.T. and
STC History Logs should appear on your laptop’s desktop.*
*NOTE: Conrm you have administrative rights by clicking the following on your computer screen:
Windows start ->Control Panel ->User Accounts ->User Accounts. See if your name appears as an administrator. If you are
the only user of a computer, you are by default the administrator. If not, you may need to consult with your company’s system
administrator prior to downloading the HySecurity S.T.A.R.T. program.
SSoftware Maintenance
STC board software is constantly being enhanced with new features that create an easier install and improve
on board diagnostic tools. Check the HySecurity website for atest version of software before heading out for
eld maintenance.
Use S.T.A.R.T. software to download latest software version to a PC laptop and upload it to gate operator in
the eld.
NOTE: If site includes a bi-parting gate system, make sure software version used in Primary and Secondary operators is
identical.
.
Electrical Controls
NOTICE: Before servicing, turn off all power switches.
No routine maintenance is needed for the electrical system or controls. If the environment is very sandy or
dusty, or has many insects, be certain to seal all holes in the electrical enclosure. Blow the dust out of the
electric panel with compressed air. Use the Table 8: Troubleshooting Codes on page 93 to assess and x
error, alert, and fault codes. If it is necessary to call a distributor for assistance, be sure to have your model and
serial number ready. Other helpful information includes the name of the job, approximate date of installation,
and the service record of the operator, especially if any work has been done recently.
Clock Battery Replacement
A lithium coin battery supports the clock, so the date and time is
retained even when the main power is turned off. Replace the battery
about every ve years (or as needed) with a DL 2025, DL 2032, or CR
2025, or CR 2032 battery.
USER 3
VEHICLE DETECTOR
OUTSIDE
OBSTR
COM
NO
STAT U S
Battery
To Next Page
Loading...
Need help?
General
