Need help?Do you have a question about the HySecurity SlideDriver 50VF2 and is the answer not in the manual?
General| Duty Cycle | Continuous |
|---|---|
| Drive System | Chain drive |
| Speed | Up to 12 inches per second |
| Weather Resistance | NEMA 3R |
| Max Gate Weight/Load Capacity | 2, 500 lbs |
| Max Gate Length/Travel Length | 50 ft |
| Control Options | Keypad, Remote, Loop Detector |
Details on limit ramps and drive rail for 50VF-series operators.
Explanation of the grooved drive rail and its benefits over the non-grooved flanged drive rail.
Information on new communication protocols and operator configurations.
Details on the ModBus protocol for monitoring VFD and logging events.
Lists and describes user-configurable settings and options for the operator.
Lists and describes installer-specific settings and advanced configuration options.
Explanation of the operator's central control unit and its functions.
Essential safety guidelines for installers and owners to prevent injury.
Visual guide to entrapment protection features for sliding gates.
Requirements for installation site, gate, equipment, and adherence to regulations.
Instructions for drilling anchor holes for operator mounting.
Steps for positioning and aligning the operator on the anchor bolts.
Instructions for attaching the drive rail to the gate panel.
Guide for installing limit ramps for gate stopping and deceleration.
Instructions for clamping the drive wheels and adjusting spring tension.
Steps for connecting the operator to the electrical power supply.
Instructions for setting the control transformer primary tap voltage.
Initial setup steps for the Smart Touch Controller before connecting external controls.
Adjusting the spring tension for the drive wheel clamp.
Verifying and adjusting drive rail alignment and movement.
List and description of available control input terminals on the STC.
Visual guide to entrapment protection components for sliding gates.
Common problems related to gate movement and their solutions.
Troubleshooting common electrical issues and alerts.
Chart detailing STC error codes, their meanings, and buzzer sequences.
Table detailing VFD fault codes, their meanings, possible causes, and solutions.
To Next Page