HySecurity SlideDriver 50VF2 - Section 2; Required Tools

7 © 2012 Installation and Reference Manual D0125 Rev. H
Section 2 — Required Tools
9. Roto-hammer and bits 10. Level (installation must be level) 11. Two pair wide
Jaw pliers or two
C clamps, 4″ cap.
5. Hammer
6. Screwdriver sets,
Straight and Phillips
7. Wrench set, open
end, ¼" through 1"
8. Electric drill and bits,
⅛" through ⅜"
4. Allen wrench set
3. Concrete anchor
bolts, four ½″ x 4″
2. Carpenters
pencil or crayon
1. Chalkline or other
builders’ string