HySecurity SlideDriver 50VF2 User Manual

SlideDriver Addendum D0395 Rev. E Page 2
www.hysecurity.com © 2012 10/18/2012
GrooVed driVe rail
The grooved drive rail has become the standard for all new SlideDriver gate operator installations.
Inthismanual,severalillustrationsshowthenon-grooved,angeddriverailwhichisnolongeravailableun-
less a Solenoid Lock option is installed.
Thegrooveddriverailreplacesthenon-grooved,angeddriverail.
A section of the two different drive rails is shown in the illustration.
The small grooves on the underside of the new drive rail improve traction in slick or wet conditions and
providemorepullingandstoppingpowerinSlideDriverinstallations.Thethreeundersideangeshave
been eliminated which reduces drive wheel wear and drag in misaligned gate installations. Additionally, the
no-angedriverailstacksbetterforshippingwhichreducesthelikelihoodoffreightdamage.
NOTE: The non-grooved, anged drive rail is standard and will be on your order unless you specify other-
wise. The non-grooved, anged drive rail is only available when using the Solenoid Lock option. The Sole-
noid Lock option requires an outer edge ange and therefore must be installed with the non-grooved,
anged drive rail.
Standard grooved drive rail Non-grooved, flanged drive rail
No anges
Grooves on the underside NOTE: Solenoid Lock option
requires anged drive rail
Grooved versus non-grooved, flanged drive rail
Scan QR code for Smart
Phone access to HySecurity
website information.
Tech Support: 800-321-9947

HySecurity SlideDriver 50VF2 Specifications

General

Brand	HySecurity
Model	SlideDriver 50VF2
Category	Gate Opener
Language	English