www.hysecurity.com © 2019 Important Safety Information MX3630-01 Rev. J 11
IDENTIFYING GATE OPERATOR CATEGORY AND USAGE CLASS
Four different vehicular usage classes are defi ned in UL325. Most HySecurity operators are approved
for use in all four UL325 defi ned usage classes.
The four usage classes are described below:
Class I
Class I: Intended for use in a location of one to four
single family dwellings or a parking area associated
with one to four single family dwellings.
Class II
Class II: Intended for use in a commercial location
or building such as a multi-family housing units (fi ve
or more single family units) hotels, garages, retail
stores or other buildings servicing general public.
Class III
Class III: Intended for use in an industrial location or
building such as factories or loading docks or other
locations not intended to service general public.
Class IV
Class IV: Intended for use in guarded industrial
locations or buildings such as an airport security
area or other restricted access location, not servicing
general public, in which access is monitored by
security personnel or via closed circuitry.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
To Next Page
Loading...
Need help?
General
