Hytera DS-9300 - Device Latitude; Communication Method for Reporting Alarms; Monitor Center IP Address; Monitor Center Port No.

Appendix: Parameters User Manual
48
Latitude or West Longitude.
Device Latitude
This parameter is subject to actual
requirements.
Negative number represents South
Latitude or West Longitude.
/
Communication Method for
Reporting Alarms
The range is 0 to 2.
 1: SNMP
 2: Reserved
/
Monitor Center IP Address
This parameter is subject to actual
requirements.
IP address of the RMS Monitor
Center.
Monitor Center Port No.
The range is 0 to 65535. This parameter
is subject to actual requirements.
Port number of the RMS
Monitor Center.
Site Description
This parameter is subject to actual
requirements.
/
Real-time Sampling
Parameter Configuration Remarks
Manufacturer ID The range is 0 to 255. /
Location Area ID The range is 0 to 65535. /
Source BS ID The range is 0 to 4294967295. /
BCCH Absolute Carrier No. The range is 0 to 65535. /
BCCH Receiving Level The range is –127 to 127. /
Signal Format
The range is 1 to 4.
 1: PDT
 2: DMR
 3: TETRA
 4: Others
/
Max. Working Channels Keep the default value unchanged.
Only available on
channel-selective devices.